653b3cb2-a67a-4063-8de5-55a19faa166e.jpg

HGLRC C1 2.4GHz 8CH Built-in ELRS Entry-Level Remote Control for FPV DCL Liftoff DRL RC Racer Drone

141,62 

Availability: Out of stock Category: Vendor: RC&Robots

Description

HGLRC C1 2.4GHz 8CH Built-in ELRS Entry-Level Remote Control for FPV DCL Liftoff DRL RC Racer Drone


Description:

HGLRC C1 Remote Control
Built-in ELRS: ELRS 2.4GHZ
Built-in ELRS refresh rate: 250Hz
Remote control sensor type: potentiometer sensor
Antenna: built-in ipex1 generation copper tube antenna
Working voltage: 6-8.4v DC
Remote control distance: greater than 500m
Output interface:
TX module NANO bin (crsf protocol)
TYPE-C(only charging and firmware flashing)
3.5MM analog trainer port
Battery: 18650 flat head battery ×2 (need to be installed by yourself) Charging:
TYPE-C charging current 1.2A
The charging time is about 3-4 hours
Remote control channel: 8 channels
Bluetooth: Bluetooth 4.2
ELRS firmware upgrade method: WIFl or TYPE-C cable brush
ELRS firmware version: ELRS 3.0
ELRS firmware name: DIY devices 2.4 GHz DIY ESP32 + E28 2.4GHz TX Weight: 195g (excluding battery)
Size: 160mmx130mmx50mm (excluding remote rod)

Wireless Dongle
Built-in ELRS Maximum supported frequency: 250hz
Receiving distance: more than 200m
Binding method: Quickly power on and off three times to enter binding mode
Interface: USB TYPE-C+USB TYPE-A double plug
Working voltage: 5v
ELRS firmware upgrade method: WIFI or USB plug
ELRS firmware version: ELRS 3.0
ELRS Firmware Name: HGLRC 2.4 GHz HGLRC Herme 2.4GHz RX External receiver support protocol: only supports CRSF protocol Weight:9.5g
Size: 74mmx21mm×12.5mm

Features:
1. Built-in 500mw radio frequency module, which can realize stable signal transmission and remote control distance;
2. The operation procedures are extremely simplified, and common operations such as frequency pairing, power adjustment, and joystick calibration can be realized without a screen, and you can get started quickly;
3. Mix and match design of three-stage switch and two-stage switch;
4. It can be equipped with a wireless dongle, no need to connect a USB data cable when practicing the simulator, and the dongle also has USB-A and USB-C dual interfaces;
5. Support the installation of third-party receivers and tuners;

Package Included:
1x HGLRC C1 Remote Control
1x Remote Control Hanging Strap
1x (Optional) Wireless Dongle
1x USB-C Data Cable

4e061e85 29b0 47ae a283 6848d689584a

3cd94ea5 bab9 44fc b157 a32b395033cc

fe6c3ca5 20fb 462f 95f4 9ef1bf980843

bc8097bd db5c 4837 99c6 0a40e8a21657

72738758 4524 473c a97c 6ce7f7f93314

60e4f54d 0cc8 4037 a69c 45fe9449f3ed

c4122e0b 1076 43f5 b4aa 690893b6e202

632f5c72 b70d 40a9 80aa 44d0a7a4e192

eabde446 492c 47d7 8002 62fa931876ba

b8a971c7 918a 4c75 96c1 6b9788e8e44b

d1830c8c a3be 4d84 a6d0 6af9fc03ffa5

c04db8a6 d781 4e79 84c1 c19c3028184b

fd56782e 8893 4c39 8fe3 87b4f11afaef

8e675f92 3828 4bec 8e94 03762e66995f

2edd4a4b 69d2 498b 8f49 5823fd6052df

0b6c6c96 ef67 4692 8405 5623897d1422

Additional information

Weight 0,195 kg
Version

remote control +strap

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

Vendor Information

Vendor: RC&Robots

Company: RC&Robots

Your name: Your email address: Your message: