AOQDQDQD ESP8266 Weather Station Kit with Temperature Humidity Atmosphetic Pressure Light Sensor 0.96 Display for Arduino IDE IoT Starter
eb714f97-bfa8-4ce7-982d-9f06592d06cf.jpg

AOQDQDQD ESP8266 Weather Station Kit with Temperature Humidity Atmosphetic Pressure Light Sensor 0.96 Display for Arduino IDE IoT Starter

3.71 out of 5
17 customer reviews|Add a review

19,21 €

Shipping

Availability: 3 in stock Category: Vendor: Electronics Stock Discoun

Description



Note: For the DIY kit, the user needs to have basic electronic knowledge, please check the manual before purchasing to make sure it can be used. Please purchase carefully to avoid unnecessary disputes. Thanks.

Description:
The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world – maybe your relatives or friends live there
The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmosphetic Pressure and light data. The weather station reads data indoor via sensor every 5 seconds and uploads it to the Internet every 60 seconds.You can see real-time data charts from your phone or computer.Of course you can modify the code to implement different functions
ESP8266: CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported with IOT platform.
DHT11 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor.The simple communication protocol greatly reduces the programming effort required
BMP180: high-precision, small size, ultra-low power 3μA pressure sensor.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors.Pressure range: 300 ~ 1100hPa.
BH1750FVI: Digital Light intensity Sensor.Direct digital output, complex calculation is omitted, omitting calibration.
OLED Yellow Blue Display :0.96′ SSD1306 128X64 Yellow&Blue OLED LCD Display with I2C IIC SPI Serial
 
Result:
1) Get weather data from OpenWeathermap at regular intervals, showing the weather of today and weather forecast for next 3 days in any city in the world
2) Read the current temperature, humidity data indoor at regular intervals
3) Regular reading of atmospheric pressure, light intensity data
4) Upload temperature,humidity,atmospheric pressure and intensity of illumination data to thingspeak.com at regular intervals
5) View weather forecast on OLED display and view environmental monitoring chart on thingspeak.com
Guidance Step:
Overview：This manual describes how to make a miniature weather station by IDE
Step 1: Install USB-To-Serial
Step 2: Install IDE for ESP8266
Step 3: Burning Firmware to ESP8266
Step 4: Connecting Components
Step 5: Register OpenWeathermap, thingspeak new account
Step 6: Import WeatherStation code in the IDE
Step 7: Add Library
Step 8: Modify File WeatherStation.ino
Step 9: Set the Board and Port again
Step 10: Burn code to ESP8266
Step 11: Result
Package Included:
1 x ESP8266-12E
1 x DHT11
1 x BMP180
1 x BH1750FVI
1 x OLED Display
1 x USB Cable
2 x Breadboard
20 x Dupont Cable

c8a38af8 735d 4e04 84f0 5ae2c2590049

cdf078a8 6f3d 4b41 b52c c8316e312fd3

Additional information

Weight 0,17 kg

17 reviews for AOQDQDQD ESP8266 Weather Station Kit with Temperature Humidity Atmosphetic Pressure Light Sensor 0.96 Display for Arduino IDE IoT Starter

  1. 5 out of 5

    Randall –

    Been using it for a while, I usually don’t write a review but this time I am truly convinced to write.

  2. 4 out of 5

    Carolina –

    Everybody skips this, but it’s actually a good item, I’ll remove 1 star for the customer support

  3. 4 out of 5

    Stacey –

    Very flexible and well designed.

  4. 4 out of 5

    Vicenta –

    Hope to see your improvement over time

  5. 4 out of 5

    Akeem –

    Everybody skips this, but it’s actually a good item, I’ll remove 1 star for the customer support

  6. 3 out of 5

    Dasia –

    Please think carefully when purchasing this item.

  7. 4 out of 5

    Heber –

    Very flexible and well designed.

  8. 4 out of 5

    Dina –

    Great item. Easy to use and really clean. Worked perfectly!

  9. 5 out of 5

    Meaghan –

    An awesome product with great flexibility. The customer support is superb. I recommend this without any doubt.

  10. 4 out of 5

    Jensen –

    Think this could be a potential item in the future

  11. 3 out of 5

    Florida –

    The quality is average, focus too much on unnecessary things

  12. 3 out of 5

    Dale –

    If you take a look closely, there’re quite some issues.

  13. 3 out of 5

    Rahsaan –

    I feel like these social media feeds are expensive for what they offer.

  14. 4 out of 5

    Shanel –

    4 stars for the product, work as described, but not as expected.

  15. 3 out of 5

    Matilde –

    I feel like these social media feeds are expensive for what they offer.

  16. 3 out of 5

    Leilani –

    No big difference compared to other similar products

  17. 3 out of 5

    Piper –

    Please think carefully when purchasing this item.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Vendor: Electronics Stock Discoun

Rating: 3.48 rating from 2072 reviews
Company: Stock&Discount

Your name: Your email address: Your message: