Cerca
Euro
Italian

Water Filter Kitchen Bathroom Sink Faucet Filtration Tap Water Clean Purifier

Venditore: Serier Electronics

Spedizione da magazzino Europeo

nessuna tassa doganale è richiesta per le spedizioni nel mercato UE




Cod.: BG-1384789
€20,01




i h
*
Water Filter Kitchen Bathroom Sink Faucet Filtration Tap Water Clean Purifier
  • COLOR TRANSPARENT
    COLOR TRANSPARENT
  • COLOR WHITE
    COLOR WHITE
Specification:
Material: ABS Plastic
Color Optional: White, Clear
Main filter components: Ceramic filter
Filter life: 10 liters per day for about 3 months
Minimum water pressure: 1.0kgf/cm²
Maximum water pressure: 4.0kgf/cm²
Operating Temperature: Raw Water ≤70℃, Filter Water ≤38℃
Size: (L)X(W)X(H) 130x95x60mm /5.12"x3.74"x2.36"(appr.)
 
Features:
● High Quality Filter
Removes rusts, sediments, worms, colloids, sediment & most bacteria.
● High Speed Water Flow
2L/min high-speed flow rate gives you plenty of clean water instantly.
● Switchable Water Flow Type
Two water flow types: unfiltered spray or filtered spray.
● Quick Fit Tap Adapter
Easy installation on almost any type of tap with screw thread.
● Quick Fit Cartridge
Quick, easy and secure filter cartridge replacement.
 
Precautions Before Installation:
- Be sure to have all the required faucet mounting adapters ready before installing the water purifier.
- The diameter of the faucet must be between 19.5mm and 24mm.
- Determine the type of faucet you are using and choose the right adapter.
- The included adapter is a water purifier suitable for almost all kitchen faucets, however, the water purifier may not be used in some unusual sizes or faucet types that are not standard.
 
Installation Steps:
1. Thread the link nut through the water outlet, attach the matching adapter to the end of the water outlet, and tighten the adapter with the adapter key inside the package.
2. Screw the link nut tightly onto the water purifier body
3. Load the filter into the water purifier body
4. Can be used normally (toggle switch to turn off or turn on filtering)
 
Replace the cartridge filter:
1. Unscrew the filter cartridge cover and pull the filter cartridge up
2. Replace the filter element, then place it vertically into the filter cartridge and cover the lid. Make sure the water purifier housing and filter holder are installed correctly. Rotate the water adjustment lever to the desired setting
 
Warming Tips:
* It is recommended that you first boil the filtered water before drinking.
* The actual service life of the filter depends on the water quality of the local tap water and the daily usage. It is rated for 3~6 months.
* Never use steel wool, abrasive cleaners or corrosive liquids to clean the water purifier. These materials may cause cracking, discoloration or deformation of the product.
 
Package Included:
1 x Water Filter
6 x Faucet Adapter
1 x Adapter Key
(not included other decorations)




















Etichetta del prodotto