Description :
This Non standard active PoE injector is a simple and convenient equipment for PoE or Non PoE devices via only an Ethernet cable, which will save your trouble about power line cabling and save cost. This PoE injector is compatible with all IEEE802.3af network devices, while it does not have auto detection function and directly supply power to the network devices by force as soon as you connect them , so you must be sure that powered devices conform to standard IEEE 802.3af in order to protect them from burning, at the same time pls be sure that your powered device support poe pin 4/5(+), 7/8(-) midspan.
Features :
8 port Power Injector module
8 LAN ports, 8 LAN+Power ports, shielde
Power VOIP phones, IP Cameras, WiFi Access Points, and more
Same voltage to all ports, share available power equally
2.1mm x 5.5mm for DC plug
LED power light
Works with any ethernet switch or router
Use any power supply to 48 volts
Plastic outside box
Specification :
Pins 1/2 & 3/6 for data
Pins 4/5 & 7/8 for power
Data rate: 10/100 Mbps TIA/EIA 568B-2
Connector: RJ-45
Input Voltage:12V-48V
Current Output:0.5-3A
Operating Temperature:0°C~50°C
Storage Temperature:-40°C~70°C
Operating Humidity:10%~80%RH
Package Includes :
1 x 8 Channel POE Injector
